Sparkler Type Filter Press, Sparkler Filter Press, Horizontal Filter Press, Standard Flow Filter Press, Mumbai, India
 
   
 

SPARKLER TYPE FILTER PRESS

“BOMBAY PHARMA EQUIPMENTS PVT. LTD. MAKE HORIZONTAL FILTER PRESS” is a sparkler type and consist of S.S. Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley.

 STANDARD FLOW TYPE : The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.

SPARKLER TYPE FILTER PRESS

Sparkler Type Filter Press


Model

Dia. of Plates

No. Of Plates

Filtering Area m2

Cake holding Cap. (Ltrs)

Flow Rate/Hrs

Size of Pump

Motor HP

BPSF - 8

8”

6 Plates
8 Plates

-

0.216
0.278

4.9
6.3

600
700

½”
½”

1 HP
1 HP

BPSF - 14

14”

8 Plates
10 Plates
12 Plates

-

0.75
0.92
1.04

22.5
27.5
32.5

1500
1800
2000

1”  
1”  
1”

2 HP
2 HP
2 HP

BPSF - 18

18”

10 Plates (S)
15 Plates (S)  23 Plates (S) 
8 Plates (D)  
12 Plates (D)

-

1.595
2.30
3.48
1.305
1.885

30
44
66
54
78

3000
4500 
7000 
2500 
4000

1 ½”  
1 ½”  
1 ½”  
1 ½”  
1 ½”

3 HP
3 HP 
3 HP 
3 HP 
3 HP

BPSF - 24

24”

12 Plates
15 Plates 
18 Plates 
24 Plates

3.3  
4.064  
4.8  
6.3

105  
130  
153  
202

5000
7500
9000
12000

-

2”  
2”  
2”  
2”

5 HP 
5 HP 
5 HP 
5 HP

Note – In model 18 Filter Plates S = Sallow Type & D = Deep Type Plates
 
SALIENT FEATURES :

•  Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C
•  M.S / S.S. Jacket can be provided for hot filtration .
•  Gives crystal clear filtration by filtering particles up to 1 micron size.
•  Scavenger arrangement to remove all the liquid.
•  Cake can be dried either by compressed air or by insert gas, steam.
•  Filtration rates from 600 Ltrs/hr. to 30000 Ltrs/hr possible depending on the models.
  Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.
  Sample collecting device & safety valve provided.
 
" QUALITY WHICH IS NEVER ENDING QUEST "
 
 
 
Fluid Bed Dryer    |     Double Cone Blender     |      Multimill        |  Octagonal Blender   |    Coating Pan    |    Mass Mixer     |     Drying Oven  |